Settings

The Settings menu lets you configure every aspect of your device. Open it from the live video screen, then tap any item to open its detail page. The available sections are listed below.

Basic Settings

Here you can modify the basic settings of the device, such as name, language, head-shaking speed, and more.

• Turn on indicator light — switch the device status LED on or off.
• Device Name — rename the device.
• Flip Left-Right — mirror the image horizontally.
• Flip Upside-Down — flip the image vertically.
• Device Language — change the device language.
• Rotation Speed — set the pan/tilt (head-shaking) speed.
• Speaker Volume — adjust the device speaker volume.

Tap Save to apply your changes.

Password Management

Here you can modify the device password.

1. Enter your Current Password.
2. Enter the New Password.
3. Re-enter it in Confirm Password.
4. Tap Save.

Normal Alarm

After the alarm is turned on, you can set the alarm mode, time interval, alarm period, alarm sensitivity and mobile phone push.

• Open — enable or disable the alarm.
• Alarm Action (Alarm Setting / Motion Detection) — choose what happens when an alarm is triggered, such as Snapshot / Take a Video.
• Alarm Push — notify the app when an alarm is triggered.
• Message Ignore — when enabled, the mobile phone no longer receives alarm information.
• Advanced (Other Settings):
  • Alarm Interval — minimum time between alarms (e.g. 00:10).
  • Alarm Time — the period during which alarms are active (e.g. All Day Alarm).
  • Sensitivity — alarm sensitivity (e.g. Low, Middle, High).

Storage Management

Here you can view and manage the device storage settings.

The page shows the storage usage at a glance:

• Storage Capacity — total capacity of the SD card.
• Video Capacity — space used by recorded video.
• Snapshot — space used by snapshots.
• Remaining Storage — free space left.
• Full Storage — choose what happens when storage is full: Stop recording or Overwrite the oldest files.

Tap Format SD Card to erase the card and free up all space.

Record Settings

Here you can modify the video recording settings.

• Record Switch — turn recording on or off.
• Pack Duration — the maximum duration of a single video file (e.g. 5 Mins).
• Audio — when off, audio will not be recorded.
• Record Quality — choose the video quality (e.g. Good).

Tap Save to apply your changes.

Advanced Settings

You can turn on Image Enhancement here.

• Image Enhancement — turn on to improve image quality.

Tap Save to apply your changes.

Network Settings

Here you can choose AP Mode or Routing Mode.

• AP Mode — connect to the device directly via its own hotspot.
• Routing Mode — connect the device to a Wi-Fi network. Select a Wi-Fi from the WIFI list and enter its password.

Sleep Timer

Here you can turn on sleep mode and set the sleep schedule.

• Open Sleep Timer — when enabled, the device preview screen cannot be viewed and the device cannot record video during the sleep period.
• Repeat Type — how often the sleep schedule repeats (e.g. Only / once).
• Start Time — when sleep mode begins (e.g. 10:30).
• End Time — when sleep mode ends (e.g. 23:59).

Tap Save to apply your changes.

About

Here you can view the device information.

The About Device page shows:

• Serial Number — the device serial number (with a copy button).
• Device Version — the hardware/model version.
• Software — the firmware version.
• Post Status — the firmware status (e.g. Release).
• Release Date — the firmware release date.
• Equipment Time Zone — the device time zone (e.g. East8 (Area)).
• Device Time — the current device time. Tap Click here to sync the device time with your phone to synchronize it.

Two device controls are available at the bottom:

• Restore factory settings — reset the device to its factory defaults.
• Device Reboot — restart the device.